Sharkit Kawa W650/800 polyester tank size comparison

Kawa W650 tank stickers

Classics and 70's design and colors, Kawa W stickers
To be printed, please tell me the one you like, or not...or suggestions...thanks.

Howlin'Wolf tank for Kawa w650

Sharkit tank type name:" HOWLIN WOLF"

Hand made one by one by renaud.

Num 177---- 400 euros
Num 183----480 euros (others access hatch and cap possible)

Num 177 & 183: Made from fuelproof resin.(by no way the cheap usual polyester resin)

-Front horse shoes are provide, they need to be glued (simply with Araldite for instance) by yourself depending the exact position of the tank you choose.
-Still depending of your tank position choice, the rear pad must be drilled (easy).

-The standard petcock provide is a 1/4 bsp, three positions, outside fuel hose 8mm.

-I can set another petcock if you provide it.
-I can drill holes for the petcock  you want if you provide datas.

If you want another cap, provide it and I'll set it on a next tank for you.

Composite tank " XR'BRO "

Sharkit tank type: XR'BRO

Ces reservoirs sont fait un à un, à la commande, prix de départ: 400 euros.
I make these tanks one by one, so whatever is your spécial request, ask me: renaud@sharkit.com
Price depend on many things, but starts at 400 euros

They are destinate to 400/800cm3 classic bikes. Shape is inspired from Harley XR.

There are two tunels available: one universal (see dimensions below) and one optionnal for Kawaski W800

MATERIAL
Main body: Fuelproof resin and fiberglass

Shell outside standard finish: grey primer

Length (without rear tab and front lips):48cm
Width: 34 cm
Height (without cap): 20cm
Tunnel width: 9,5cm; a bit more at front
At rear tunnel stops about 1,5cm before end of outside shell.
Floor and rear tab are 1,5cm highter than the bottom of outside shell

REAR TAB about 8x5,5cm. Drill holes when the tank sets on bike, recommanded !

Front DAMPER SUPPORT/HORSE SHOES:
For Kawasaki W.
For another bike, without the bike, I cannot set the horse shoes at the perfect place,
so: http://renax-motorbike.blogspot.com/2017/06/4-bottom-screws-tank-fixing-system.html

FRONT LIPS: about 1,5cm ,but can be reduced to nothing, its possible.

TOP HOLE without cap support plate/cap flange: diameter 11,4cm

NO CAP usualy provide BUT:
I may provide cap depending wat I have stocked.
Provide: cap support plate/cap flange: aluminium 1,5mm thick,  diameter 15cm.
The flange will have to be drilled for the cap of your choice.
Set flange with gasket, fuelproof sealing compound for instance or better: cork.
Eight stainless 5mm bolts are epoxy bonded inside the tank for flange fixing.

PETCOK: no petcok is provide,
but I can set one if you send it to me, or prepare the place to receive it.
The Basic tank have two gas exit alu tubes/stand pipes:
-out-side diameter 8mm
-located at 1/3 from the rear
-one on each side: one for reserve and the other one to supplies all the fuel.

-
 

Yam 650 xs de Jean-Luc

Terrible !
Le projet avance sérieux.

Je fais un peu de pub au passage, la selle est une Apollo

STICKERS Amalgame impresssion

Des planches à imprimer

Les stickers harley avec l'oiseau noir sont des repros d'un modèle de réservoir de 1933 ou 36.
-
Vu le Flying Eyeball à la Von Dutch ?
-
-
-
Dessous: impression sur tissu, pour blousons, taille environ 30x30cm.
Notez la Blood Chit coréenne;

Honda FX 650 Vigor

http://motorivista.com/honda-fx-650-vigor/

Bois et Alu

Good concept for a cheap flat tracker.

http://forum.ozvmx.com/index.php?topic=28189.0

Harley Vespa

Voxan CR

JAWA 877 ou katé Ruby

J'ai fait ces dessins pour le fun...

 -

-

Bond Minibyke

-
http://www.bondownersclub.co.uk/types/others/minibyke.html
-

Ebauche pour la moto de Dave

En haut de gauche à droite: la moto d'origine, telle que Dave l'acheta en 73, telle qu'elle est présentement.
L'idée est de faire un street à partir de la moto de track.

Moto de Dave

une possibilité pour la partie arrière, avec une forme de développement
(peut-étre plus simple que trouver une piéce adaptable)

Bestiole 2

Pour la bestiole 1, voir un peu plus bas. Dessin renaud.

XLR 600 (et Dominator)

-

 -

TIGER TAIL 2

Peu de modif de la moto originale,
puisque c'est sensé être réalisé à partir de la moto d'origine.

j'ai fait ce dessin pour le concour du TBMCF
ICI   le facebook du club, où seront publiés les différents dessins,

il y aura un vote si j'ai bien compris;
à suivre.

Le pot 2 en 1 de l'image du dessous est un Zard.

Ca marche à tous les coups

ELSPETH BEARD

http://selvedgeyard.com/2011/01/30/air-head-around-the-world-elspeth-beard-on-her-bmw-r-606/